Mondial PRESSCONTROL 1.1KW (1 Inch)

Motor

Insulation Class

F

Operating Conditions

Maximum Fluid Temperature

+60C

Maximum working pressure

8 Bar

Maximum Flow Rate

6

Pump Information

Model

Presscontrol 1.1kW

Power (kW)

1.1

Cut Pressure

1.5 Bar

Maximum Operating Current (A)

16

Dimension(mm) A

160

Dimension(mm) B

200

Dimension(mm) C

Outlet BSP

1"

Weight (kg)

1.3

Watertech Pump Controllers area revolutionary integrated booster pump control units for the provision of automatic pressurised water supply. They incorporate a combination of hydraulic and electronic control functions, starting the pump when system pressure drops to thepre-set value and stopping the pump when demand drops below the cut-out flow rate. Particular features are:

Automatic pump start and stop as determined by user demand.

Maintenance of constant output pressure.

Pump shutdown in the event of low suction supply or suction blockage.

Attenuates the effects of water hammer .

Completely maintenance free; no air charging or adjustment necessary .

LED for power on, pump on and failure (except Mondial).

Compact and simple to install.

Three models are available, the Mondial, Presscontrol and Mascontrol with their application dependent upon the pump motor size and system flow rate. For larger flow and motor sizeapplications, the unit can be fitted on a bypass and connected to the motor starter through a contactor on the control circuit.

Watertech Pump Controllers unique design offers many advantages over conventional expansion tank systems and also dispenses with the necessity for separate dry run protection.Their simplicity ,reliability and effectiveness make them the ideal solution for the automatic control of all small pumped water supply installations.

INSTALLATION

Presscontrol is designed to screw directly on to the delivery outlet of the pump and accomodate the full deliverflow . As cut-in pressure is fixed at 1.5 Bar (15m) the system static head must be at least 0.2 Bar (2m) below thisvalue. It can be fitted to either dry booster pumps with positive or negative suctions and to submersible pumps.

l Starts pump on pressure and stops on low flow. The start pressure is adjustable between 1.3 - 5 Bar

l Inbuilt timer delays pump starting and controls pump cycling in low flow conditions eliminating the need

for a separate pressure vessel

l Dry run protection with automatic reset

l LED power and run dry indicators

l Built in pressure gauge

A high specification in-line electronic pump controller that starts on pressure and stops on either low flow or a

settable pressure. It completely replaces the traditional pressure tank/pressure switch systems whilst providing

• Simple start and stop pressure setting with digital pressure display.

• Dry run protection

• Motor over current providing protection against overload and blocked water conditions.

• Options of master/slave configuration in twin booster set application and auto change-over.

• Operating/error status indicator via LED’s and display alerts.

• Input and output terminals for remote connection.

• Rotor anti-blocking function used to prevent seizure of mechanical parts during prolonged periods of

pump inactivity.

Multi functional electronic controllers for operation and running of single and three phase pumps. Features

phase units) and transient surge protection.

The Controllers have LCD display including running status and error conditions that can hold memory fo upto

last five failure events.

00

MAXCON PUMP

CONTROL

SCM2

SCT7

SCT15

High specification in-line electronic pump controllers for automatic operation of pressurised water supplies.

• Starts pump on pressure or through the flow sensor (minimum 1.5litres/min)and stops on low flow. The

controller automatically senses the pipe pressure and regulates the starting pressure

• Dry run protection provided and restart when supply returns (positive suction)

• Incorporates a spring activated hydraulic accumulator to control pump cycling

• LED power on, pump run, dry run indicators and delay timer

• Settable delay timer for tank filling (P)

• Built in pressure gauge for pressure monitoring (P)

Superpress S

Superpress P

SUPERPRESS

CONTROLLER

• Starts pump on pressure (fixed at 1.5Bar) stops on low flow.

• Dry run protection provided. Standard models require manual reset, Automatic models restart when

supply returns (positive suction)

• Incorporates a spring activated hydraulic accumulator to control pump cycling

• LED power on, pump run and run dry indicators

Auto

Manual

PRESSCON

CONTROLLERS

UPD

A

TED

Pump

Controllers